Gigabit Ethernet Switch Management Guide

2-1
C HAPTER 2
C ONSOLE I NTERFACE
Log-in Screen
Once a direct connection to the serial port or a Telnet connection
is established, the log-in screen for the onboard configuration
program appears as shown below.
If this is your first time to log into the configuration program, then
the default user names are “admin” and “guest,” with no password.
The administrator has Read/Write access to all configuration
parameters and statistics. While the guest has Read Only access to
the management program.
You should define a new administrator password, record it and put
it in a safe place. Select Console Login Configuration from the
Management Setup Menu and enter a new password for the
administrator. Note that passwords can consist of up to 11
alphanumeric characters and are not case sensitive.
SSSSSSSSSSSSSSS MMMMM MMMMM CCCCCCCCCCCCCC
SSSSSSSSSSSSSSSSS MM MM CCCCCCCCCCCCCCCC
SS S MMM MMM CCC CC
SS MMMM MMMM CCC
SSSSSSSSSSSSSSSS MM MM MM MM CCC
SS MM MM MM MM CCC CC
S SS MM MM MM MM CCC CC
SSSSSSSSSSSSSSSSS MM MMM MM CCCCCCCCCCCCCCCC
SSSSSSSSSSSSSSS MMMM MMMMM MMMM CCCCCCCCCCCCCC
TigerSwitch 1000 SMC8606T
V2.04.03.07 08-01-2001 (c)Copyright 2001, SMC Networks Inc.
User name :
Enter Password :