Wireless Cable Router User Manual

a. Either the Gateway’s Private LAN IP address or Public LAN IP address can be
configured as the end point for the VPN tunnel. Select either [Protect Private
Lan] or [Protect Public Lan] to enable the entire Private or Public LAN to be
part of the VPN tunnel and the respective Gateway LAN IP address will
populate the [Intranet Address] and [Intranet Subnet Mask] fields.
b. Enter the [Local ID] which must match the “Remote ID” of the remote VPN end
point.
c. Enter the [Remote Gateway ID] which must match the “Local ID” of the remote
VPN end point.
d. Enter the [Remote Gateway Address]
e. Enter the [Pre-shared Key] which must match the “Pre-shared Key” value of
the remote VPN end point.
f. Enter the [IKE Life Duration] value