User's Manual

User Manual
78
 Firewall Name: Select it from the drop-down list.
 Protocol: You can select UDP, TCP, or ICMP from the drop-down list.
 Action: You can select Permit, Drop, or Reject from the drop-down list.
After finishing setting, click Save/Apply to save and activate the rule.
MAC Filtering Setup
In some cases, you may want to manage Layer2 MAC address to block or permit a
computer within the home network. When you enable MAC filter rules, the DSL router
serves as a firewall that works at layer 2.
Note:
MAC filtering is only effective on ATM PVCs configured in bridge mode.
Choose Security > MAC Filtering and the following page appears.