User's Manual

HAPTER

| Device Information

WAN Status

– 48 –

WAN STATUS

The ADSL Router WAN window displays basic IPv4 and IPv6 WAN port

settings.

Figure 15: Status - WAN

The following items are displayed on this page:

◆ Interface — Displays the interface identifier.

◆ VPI/VCI — Displays the ATM channel identifiers.

◆ Encapsulation — Displays the encapsulation type chosen, either LLC

to VX-Mux.

◆ Default Route — Dipslays if a default route has been enabled.

◆ Protocol — Displays the protocol used for transmission of data packets

◆ IP Address — Displays the local IP address of the WAN port.

◆ Default Gateway — Displays the network route, or gateway used by

the unit when no other known route exists for a given IP packet's

destination address.

◆ Status — Specifies the status of the interface.

◆ DNS Servers — Specifies the IP addresses of DNS servers.