User's Manual

HAPTER

| Installing the Router

Cable Connections

– 31 –

◆ Power requirements: 12 VDC using the included AC power adapter.

Make sure that a properly grounded power outlet is within 1.8m (6 ft)

of the router.

◆ The router should be located in a cool dry place, with at least

5 cm (2 in.) of space on all sides for ventilation.

◆ Place the router out of direct sunlight, and away from heat sources or

areas with a high amount of electromagnetic interference. The

temperature and humidity should be within the ranges listed in the

specifications.

CABLE CONNECTIONS

The ADSL Gateway Router needs to be connected to the DSL telephone line

from the service provider, and to a computer or LAN switch.

Figure 4: Connecting the Router

To install the router, follow these steps:

1. Using standard telephone cable, connect the Line port on the included

ADSL splitter to the RJ-11 telephone wall jack providing the ADSL

service.

2. Using standard telephone cable, connect the Modem port on the

included ADSL splitter to the RJ-11 Line port on the ADSL Gateway

Router.

Category 5

UTP Cable

Computer

AC Power

Adapter

AC Power Outlet

Telephone Wall Jack

Standard

Telephone

Cable

Splitter

Telephone