User's Manual

C HAPTER 7 | Services
MAC Filtering
– 76 –
MAC FILTERING
MAC based packet filtering enables the router to filter clients based on their
physical layer address.
Figure 39: MAC Filtering Settings
The following items are displayed on this page:
◆ Outgoing Default Policy — A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries are
allowed.)
◆ Incoming Default Policy — A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries.)
N OTE : The default outgoing and incoming defaults allow traffic from all MAC
addresses.
◆ Direction — Specifies the packet destination. (Default: Outgoing)
◆ Action — Specifies if traffic should be permitted or denied. (Options:
Deny, Allow; Default: Deny)
◆ Source MAC Address — Specifies a source MAC address.
◆ Destination MAC Address — Specifies a destination MAC address.