User's Manual

HAPTER

| Services

Access Control Lists

– 64 –

CURRENT ACL TABLE

Lists the configured ACLs on the LAN ports.

◆ Select — The number of the entry in the table.

◆ Direction — Displays if the ACL is applied to a LAN or WAN interface.

◆ IP Address/Interface — Displays the allowed IP address or range.

◆ Service — Dispays the allowed service.

◆ Port — Displays the TCP/UDP port of the allowed service.

◆ Action — Click the button to remove the entry from the table.

WAN ACLS When you select WAN for the ACL “direction,” you can configure ACLs that

apply to WAN interfaces.

Figure 29: WAN ACL Configuration

The following items are displayed on this page:

◆ WAN Setting — Selects a WAN interface or IP address.

■

WAN Interface — Specifies a configured WAN interface for the

ACL.

■

IP Address — Specify a LAN IP address or range of addresses that

are allowed access to the ADSL Router.

◆ Services Allowed — Specifies services that are allowed access from

LAN interfaces, or allows “any.”