User's Manual

C HAPTER 5 | LAN Settings
DHCP Settings
– 50 –
◆ Default Gateway — Specifies the gateway address through which
traffic is routed from. Usually the LAN IP address of the ADSL Router
◆ MAX Lease Time — Select a time limit for the use of an IP address
from the IP pool. When the time limit expires, the client has to request
a new IP address. The lease time is expressed in seconds.
(Default: 86400 seconds; Range: 60~86400 seconds; -1 indicates an
infinite lease time)
◆ Domain Name — Specifies the unique name used to identify the ADSL
Router on the network.
◆ DNS Servers — Sets up to three domain name server IP addresses.
◆ Set VendorClass IP Range — Click on this option to assign IP
address ranges to specific device types.
■
Device Name — Describes the device type.
■
Start/End Address — Specifies the IP addresses from the DHCP IP
pool to assign to this device type.
■
Router Address — Specifies a default router IP address to use for
traffic from this device.
■
Option 60 — Specifies the DHCP Option 60 vendor class identifier
that indicates the device type.
Figure 21: Device IP Range Table