User's Manual

C HAPTER 3 | System Configuration
Using the Web Interface
– 31 –
DHCP Config
DHCP Mode Sets DHCP server and DHCP relay settings 47
Static IP Configures static DHCP assignments 51
WAN Interface
Channel Config Configures the DSL channel settings 53
ATM Settings Configures DSL ATM settings 55
ADSL Settings Configures ADSL settings 57
Services
DNS
DNS Server Configures DNS server settings 60
Dynamic DNS Configures DDNS settings 61
Access Control List
ACL Config Configures ACLs for LAN or WAN interfaces 63
IP/Port Filtering Configures IP filtering settings 66
NAT/NAPT
Virtual Server Configures the virtual server forwarding table 68
NAT Exclude IP Configures excluded IPs on the WAN interface 70
NAT Forwarding Configures forwarding for access to local servers 70
NAT ALG and Pass-
Through
Configures NAT passthrough for specific application
protocols
71
NAT Port Trigger Restricts Internet access for specific ports 72
FTP ALG
Configuration
Configures FTP server and client ports 73
NAT IP Mapping Configures IP address mapping for NAT 73
IP QoS Configures IP-based QoS settings 74
MAC Filtering Configures MAC address filtering 76
DMZ Configures DMZ settings 77
URL Block Sets URL key words to block 78
Software Forbidden Blocks Internet access for specific software 79
DoS Setting Configures denial-of-service settings 80
IGMP Proxy Configures IGMP Proxy settings for multicast traffic 82
RIP Configures Routing Information Protocol settings 84
ARP Binding Configures Address Resolution Protocol binding 85
Advance
Bridge Setting Configures aging time and Spanning Tree settings 87
Log Setting Configures system log settings 88
Routing Configures static routing 89
Table 2: Configuration Menu (Continued)
Menu Description Page