User's Manual

C HAPTER 2 | Installing the Router
Cable Connections
– 24 –
◆ The router should be located in a cool dry place, with at least
5 cm (2 in.) of space on all sides for ventilation.
◆ Place the router out of direct sunlight, and away from heat sources or
areas with a high amount of electromagnetic interference. The
temperature and humidity should be within the ranges listed in the
specifications.
CABLE CONNECTIONS
The ADSL Gateway Router needs to be connected to the DSL telephone line
from the service provider, and to a computer or LAN switch.
Figure 3: Connecting the Router
To install the router, follow these steps:
1. Using standard telephone cable, connect the Line port on the included
ADSL splitter to the RJ-11 telephone wall jack providing the ADSL
service.
2. Using standard telephone cable, connect the Modem port on the
included ADSL splitter to the RJ-11 Line port on the ADSL Gateway
Router.
3. The Phone port on the ADSL splitter can be connected to a standard
telephone set using telephone cable.
Category 5
UTP Cable
Computer
AC Power
Adapter
AC Power Outlet
Telephone Wall Jack
Standard
Telephone
Cable
Splitter
Telephone