Switch User Manual

S YSTEM R EQUIREMENTS
1-5
• Supports ITU-T VDSL/VDSL2 and ANSI T1E1.4 Part 1 VDSL
interface standards, as well as other evolving ETSI, ANSI, and ITU
VDSL standards for the copper local loop
• Spectral compatibility with VDSL, VDSL2, ADSL, ADSL2+, ISDN
(2B1Q/4B3T), Smartphone digital PBX extensions and narrowband
interference
• Robust operation on severely distorted lines
• Supports power back-off algorithm that permits a mixed distance
deployment
• LEDs indicate VDSL link status, and power
• Simple plug-and-play installation
Additional VDSL2 features (CPE side) include:
• Fast startup for quick initialization
• Trellis coding modulation for higher performance
• Seamless rate adaption for enhanced quality in video applications
• Variable tone spacing enables best performance for long and short
reach lines
• Improved framing, overhead channel, and interleaving
System Requirements
Before you start installing the CPE, make sure you can provide the right
operating environment. See the following installation requirements:
• A PC or Macintosh with a 10/100 Mbps Ethernet adapter card
installed.
• For Internet access, the computer must be configured for TCP/IP.