Network Card User Manual

C ONFIGURING THE S WITCH
2-62
Command Line Interface
This example shows trunk 1 being configured as a downlink interface.
However, since ports 9 and 17 are members of trunk 1, ports 9-24 would
all become downlink ports.
In this example ports 9 and 17 are shown being configured as downlink
ports. Ports 10-16 and 18-24 will also become downlink ports as ports 9
and 17 are members of trunk 1.
Console(config)#pvlan 3-105
Console(config)#pvlan up-link ethernet 1/25 down-link port-channel 1
Console(config)#end
Console#show pvlan 3-107
Private VLAN status: Enabled
Up-link port:
Ethernet 1/1
Down-link port:
Trunk 1
Console#
Console(config)#pvlan up-link ethernet 1/25 down-link
ethernet 1/9,17 3-107
Console(config)#