Network Card User Manual

C ONFIGURING THE S WITCH
2-26
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Fields and Attributes
• Name – Interface label.
• Type – Indicates the port type (100Base-TX EFM, 100Base-TX
NORMAL, 100Base-FX NORMAL, 1000Base-T NORMAL, or
1000Base-GBIC NORMAL.)
Note: “NORMAL” indicates that this is an Ethernet port.
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed/Duplex Status – Shows the current speed and duplex mode.
• Flow Control Status – Indicates the type of flow control currently in
use.
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Trunk Member – Shows if a port is a trunk member. (Port
Information only.)
• Creation – Shows if a trunk is manually configured. (Trunk
Information only.)