Network Card User Manual

C ONFIGURING THE S WITCH
2-6
Port
Port Information Displays port connection status 2-26
Trunk Information Displays trunk connection status 2-26
Port Configuration Configures port connection settings 2-28
Trunk Configuration Configures trunk connection settings 2-28
Port Broadcast Control Sets the broadcast storm threshold for each
port
2-30
Monitor Sets the source and target ports for mirroring 2-31
Port Security
Configuration
Enables/disables port security 2-32
Address Table
Dynamic Addresses Displays or edits dynamic entries in the
Address Table
2-33
Static Addresses Displays or edits static entries in the Address
Table
2-35
Address Aging Sets timeout for dynamically learned entries 2-36
STA
STA Information Displays STA values used for the bridge 2-39
STA Configuration Configures global bridge settings for STA 2-40
STA Port
Configuration
Configures individual port settings for STA 2-41
STA Trunk
Configuration
Configures individual trunk settings for STA 2-41
VLAN
VLAN Base
Information
Displays basic information on the VLAN
type supported by this switch
2-49
VLAN Current Table Shows the current port members of each
VLAN and whether or not the port supports
VLAN tagging
2-50
VLAN Static List Used to create or remove VLAN groups 2-52
VLAN Static Table Modifies the settings for an existing VLAN 2-53
VLAN Static
Membership
Configures membership type for interfaces,
including tagged, untagged or forbidden
2-55
Menu Description Page