Network Card User Manual

VDSL C OMMANDS
3-149
the default values. These rates may be configured to values
between 1 Mbps and 15 Mbps.
Example
Related Commands
efm profile
efm profile
Use this command to assign profiles for speed to a specific VDSL port on
the switch.
Syntax
efm profile profile name
profile name - Name of the profile.
Default Setting
None
Command Mode
Interface Configuration
Command Usage
Assigns a profile to a specific VDSL port. For details of these profiles
see the table under Command Usage for efm profile global.
Example
The following example shows profile “efm-10” assigned to VDSL port 1.
Related Commands
efm profile global
efm define user-profile
Console#config
Console(config)#efm profile global public-ansi
Console(config)#
Console#config
Console(config)#efm profile global public-ansi
Console(config)#interface ethernet 1/1
Console(config-if)#efm profile efm-10
Console(config-if)#