Network Card User Manual

C OMMAND L INE I NTERFACE
3-112
Example
Related Commands
garp timer
bridge-ext gvrp
Use this command to enable GVRP. Use the no form to disable it.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 sec.
Leave timer: 60 sec.
Leaveall timer: 1000 sec.
Console#
Console(config)#bridge-ext gvrp
Console(config)#