Network Card User Manual

VLAN C OMMANDS
3-95
VLAN Commands
A VLAN is a group of ports that may be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Function Mode Page
Edit VLAN Groups
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 3-95
vlan Configures a VLAN, including VID, name
and state
VC 3-97
Configure VLAN Interfaces
interface vlan Enters interface configuration mode for
specified VLAN
IC 3-98
switchport mode Configures VLAN membership mode for
an interface
IC 3-99
switchport
acceptable-frame-
types
Configures frame types to be accepted by
an interface
IC 3-100
swicthport
ingress-filtering
Enables ingress filtering on an interface IC 3-100
switchport native
vlan
Configures the PVID (native VLAN) of an
interface
IC 3-101
switchport allowed
vlan
Configures the VLANs associated with an
interface
IC 3-102
switchport gvrp Enables GVRP for an interface IC 3-108
switchport
forbidden vlan
Configures forbidden VLANs for an
interface
IC 3-103