Network Card User Manual

S PANNING T REE C OMMANDS
3-85
Spanning Tree Commands
This section includes commands that configure STP for the overall switch,
and commands that configure STP for the selected interface.
Note: The access mode shown in the table is indicated by these
abbreviations: NE (Normal Exec), PE (Privileged Exec),
GC (Global Configuration), IC (Interface Configuration),
LC (Line Configuration), VC (VLAN Database Configuration.)
Command Function Mode Page
bridge spanning-tree Enables the spanning tree protocol GC 3-87
bridge forward-time Configures the spanning tree bridge
forward time
GC 3-87
bridge hello-time Configures the spanning tree bridge
hello time
GC 3-88
bridge max-age Configures the spanning tree bridge
maximum age
GC 3-89
bridge priority Configures the spanning tree bridge
priority
GC 3-90
bridge-group path-cost Configures the spanning tree path cost
of an interface
IC 3-91
bridge-group priority Configures the spanning tree priority
of an interface
IC 3-92
bridge-group portfast Sets an interface to fast forwarding IC 3-93
show bridge group Shows spanning tree configuration for
the overall bridge or a selected
interface
PE 3-94