Network Card User Manual

C OMMAND L INE I NTERFACE
3-62
Command Mode
Line Configuration
Command Usage
• If there is user input within the exec-timeout interval, the current
session will be maintained. If there is no user input within this time
interval, the current session is terminated.
• This command applies to both the local console and Telnet
connections.
• The timeout for Telnet cannot be disabled.
Example
To set the timeout to 120 seconds, enter this command:
password-thresh
Use this command to set the password intrusion threshold which limits the
number of failed logon attempts. Use the no form to remove the threshold
value.
Syntax
password-thresh threshold
no password-thresh
threshold - The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
Default Setting
The default value is three attempts.
Command Mode
Line Configuration
Command Usage
• When the logon attempt threshold is reached, the system interface
becomes inaccessible for a specified amount of time before allowing
Console(config-line)#exec-timeout 120
Console(config-line)#