Network Card User Manual

L INE C OMMANDS
3-61
Command Mode
Line Configuration
Command Usage
• When a connection is started on a line with password protection, the
system prompts for the password. If you enter the correct password,
the system shows a prompt. You can use the password-thresh
command to set the number of times a user can enter an incorrect
password before the system terminates the line connection and
returns the terminal to the idle state.
• The encrypted password is required for several functions such as
booting up the system, or for compatibility with legacy password
settings (i.e., plain text or encrypted) that are copied from a tftp server.
There is no need for the user to enter encrypted passwords.
Example
Related Commands
login
password-thresh
exec-timeout
Use this command to set the interval with no user input after which the
current session will be terminated. Use the no form to disable the timeout
function.
Syntax
exec-timeout seconds
no exec-timeout
seconds - Integer that specifies the number of seconds.
(Range: 0 - 65535 seconds; 0: no timeout)
Default Setting
CLI: No timeout
Telnet: 10 minutes
Console(config-line)#password 0 secret
Console(config-line)#