Network Card User Manual

C OMMAND L INE I NTERFACE
3-60
Default Setting
By default, virtual terminals require a password. If you do not set a
password for a virtual terminal, it will respond to attempted
connections by displaying an error message and closing the
connection.
Command Mode
Line Configuration
Command Usage
If you specify login without the local option, authentication is based
on the password specified with the password line configuration
command.
Example
Related Commands
username
password
password
Use this command to specify the password for a line. Use the no form to
remove the password.
Syntax
password {0 | 7} password
no password
•{0 | 7} - 0 means plain password, 7 means encrypted password
• password - Character string that specifies the line password. The
string can contain any alphanumeric characters, besides spaces,
and can contain up to 8 characters. The password is case
sensitive.
Default Setting
No password is specified.
Console(config-line)#login local
Console(config-line)#