Network Card User Manual

C OMMAND L INE I NTERFACE
3-56
Example
Related Commands
ip default-gateway
ping
Use this command to send ICMP echo request packets to another node on
the network.
Syntax
ping host [size size][count count]
• host - IP address or IP alias of the host.
• size - Number of bytes in a packet. (Range: 32-512, default: 32
bytes)
• count - Number of packets to send. (Range: 1-16, default: 5)
• The actual packet size will be eight bytes larger than the size
specified because the switch adds header information.
Default Setting
This command has no default for the host.
Command Mode
Normal Exec, Privileged Exec
Command Usage
• Use the ping command to see if another site on the network can be
reached.
• Following are some results of the ping command:
Console#show ip redirects
ip default gateway 10.1.0.254
Console#