Network Card User Manual

RADIUS C OMMANDS
3-39
RADIUS Commands
Remote Authentication Dial-in User Service (RADIUS) is a system that
uses a central server running RADIUS software to control access to
RADIUS-aware devices on the network. A RADIUS server contains a
database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch
using the console port, Telnet, or Web.
Note: The access mode shown in the table is indicated by these
abbreviations: NE (Normal Exec), PE (Privileged Exec),
GC (Global Configuration), IC (Interface Configuration),
LC (Line Configuration), VC (VLAN Database Configuration.)
authentication login
Use this command to define the login authentication method and
precedence. Use the no form to restore the default.
Syntax
authentication login {radius | local | radius local | local radius}
no authentication login
• radius - Use RADIUS server password only.
• local - Use local password only.
Command Function Mode Page
authentication login Defines logon authentication method
and precedence
GC 3-39
radius-server host Specifies the RADIUS server GC 3-40
radius-server port Sets the RADIUS server network port GC 3-41
radius-server key Sets the RADIUS encryption key GC 3-41
radius-server retransmit Sets the number of retries GC 3-42
radius-server timeout Sets the interval between sending
authentication requests
GC 3-42
show radius-server Shows the current RADIUS settings PE 3-43