Network Card User Manual

S YSTEM M ANAGEMENT C OMMANDS
3-33
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
Sending syslog messages to the SNMP network management station
occurs when you enable syslog traps with the snmp enable traps
command.
Example
Related Commands
snmp-server enable traps
snmp-server host
clear logging
Use this command to clear messages from the log buffer.
Syntax
• clear logging [flash | ram]
• flash - Event history stored in flash memory (i.e., permanent
memory.)
• ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset.)
notifications 5 Normal but significant
condition
informational 6 Informational messages
only
debugging 7 Debugging messages
Console(config)#logging history ram 0
Console(config)#
Level Argument Level Description