Network Card User Manual

C OMMAND L INE I NTERFACE
3-28
username
Use this command to require user name authentication at login. Use the
no form to remove a user name.
Syntax
username name {access-level level | nopassword |password {0 |
7} password}
no username name
• name - The name of the user.
• (Maximum length: 8 characters; maximum number of users: 16)
• access-level level - Specifies the user level.
• The device has two predefined privilege levels:
0:NormalExec,15: Privileged Exec.
• nopassword - No password is required for this user to log in.
•{0 | 7} - 0 means plain password, 7 means encrypted password.
• password password - The authentication password for the user.
(Maximum length 8 characters, case sensitive)
Default Setting
• The default access mode is Privileged Exec.
• The default passwords are “guest” in Normal Exec mode, and “admin”
in Privileged Exec mode.
Factory defaults for the user names and passwords are:
Command Mode
Global Configuration
username access-level password
guest
admin
0
15
guest
admin