Network Card User Manual

C OMMAND L INE I NTERFACE
3-26
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for
the device
GC 3-27
User Access Commands
enable password Sets a password to control access to the
privileged mode from the normal mode
GC 3-29
Web Server Commands
ip http port Specifies the port to be used by the Web
browser interface
GC 3-30
ip http server Allows the switch to be monitored or
configured from a browser
GC 3-31
Event Logging Commands
logging on Controls logging of error messages GC 3-31
logging history Limits syslog messages sent to the
SNMP network management station
based on severity
GC 3-32
clear logging Clears messages from the logging buffer PE 3-33
show logging Displays the state of logging PE 3-34
System Status Commands
show startup-config Displays the contents of the
configuration file (stored in Flash
memory) that is used to start up the
system
PE 3-35
show running-config Displays the configuration data currently
in use
PE 3-36
show system Displays system information NE, PE 3-37