Network Card User Manual

G ENERAL C OMMANDS
3-13
enable
Use this command to activate Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See “Understanding Command Modes” on page
3-7.
Syntax
enable [level]
level - Privilege level to log in to the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the command
mode from Normal Exec to Privileged Exec. (To set this password,
see the enable password command on page 3-29.)
• The “#” character is appended to the end of the prompt to indicate
that the system is in privileged access mode.
• You only need to use Level 15. Setting the password for Level 0 has
no effect.