Network Card User Manual

C OMMAND L INE I NTERFACE
3-10
Command Groups
The system commands can be broken down into the functional groups
shown below
.
Command
Group
Description Page
General Basic commands for entering privileged access
mode, restarting the system, or quitting the CLI
3-12
Flash/File Manages code image or switch configuration files 3-19
System
Management
Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information
3-26
Radius Client Configures RADIUS client-server authentication for
logon access
3-39
SNMP Activates authentication failure traps; configures
community access strings, and trap managers
3-44
IP Configures the IP address and gateway for
management access, DHCP server and relay service
for server blades, displays the default gateway, or
pings a specified device
3-51
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
3-68
Address Table Configures the address table for filtering specified
addresses, displaying current entries, clearing the
table, or setting the aging time
3-79
Port Security Configures secure addresses for a port 3-84
Spanning Tree Configures Spanning Tree settings for the switch 3-85
VLAN Configures VLAN settings, and defines port
membership for VLAN groups
3-95
PVLAN Enables or configures Private VLAN 3-105
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for bridge
extension MIB
3-105
IGMP Snooping Configures IGMP multicast filtering, querier
eligibility, query parameters, and specifies ports
attached to a multicast router
3-114