Network Card User Manual

VDSL C ONFIGURATION
2-101
Command Line Interface
The following examples show how these features are configured in the
CLI.
This example disables VDSL port 1.
The following example shows how to enable/disable RDL on VDSL
port 1.
The following example shows VDSL port 1 configured to a maximum
transmission rate of 1 Mbps.
The following example shows EFM profile efm-10 assigned to VDSL
port 1.
Configuring a User-specified EFM Profile
Use this command to set user specified downstream rate, upstream rate
and interleave depth.
Fields and Attributes
• Profile – The name of the user-specified profile. This can be “user-1”
or “user-2.”
Console (config)#interface ethernet 1/1 3-69
Console(config-if)#efm shutdown
3-151
Console(config-if)#
Console (config)#interface ethernet 1/1 3-69
Console(config-if)#efm rdl 3-152
Console(config-if)#no efm rdl
Console(config-if)#
onsole#config
Console(config)#interface ethernet 1/1 3-69
Console(config-if)#efm flow-control 1 3-153
Console(config-if)#
Console#config
Console(config)#efm profile global public-ansi 3-147
Console(config)#interface ethernet 1/1 3-69
Console(config-if)#efm profile efm-10 3-149
Console(config-if)#