Network Card User Manual

VDSL C ONFIGURATION
2-99
Web Interface
Click VDSL/VDSL Global Configuration.
Command Line Interface
This example shows configuring the switch to public-ansi profile.
VDSL Port Configuration
You can enable/disable a selected port, enable/disable Remote Digital
Loopback (RDL), set the value for EFM flow control (the maximum speed
of transmission of data from a specific switch VDSL port to the CPE), and
configure an EFM profile for the selected port.
Command Usage
Use this command to disable the VDSL chipset transmitter of a VDSL
port that is not connected to a working CPE. In some unusual
circumstances, the power emitted by VDSL ports can affect other VDSL
ports. It is recommended that ports that are not wired to CPEs be
shutdown in this way.
Also use this command to disable access to the switch from this port.
Console#config
Console(config)#efm profile global public-ansi 3-147
Console(config)#