Network Card User Manual

VDSL C ONFIGURATION
2-97
VDSL Configuration
You can configure and display communication parameters for VDSL and
Ethernet ports on the switch and connected CPEs.
Note: The term EFM used in this section stands for Ethernet in the First
Mile. The “first mile” is the connection between business and
residential users and the public network. The VDSL Intelligent
Switch uses VDSL-based technology for this connection.
VDSL Global Configuration
Assigns the same profile to each VDSL switch port. Details of these
profiles are given in the table below.
Profile Name ProfileType Downstream Rate
(Mbps)
Upstream Rate
(Mbps)
default Private 4.17 1.56
efm-5 Private 6.25 6.25
efm-10 Private 12.50 12.50
efm-15 Private 16.67 18.75
public-ansi Public 16.67 4.67
public-etsi Public 12.50 4.67
efm-5 LL Private 6.25 6.25
efm-10 LL Private 12.50 12.50
efm-15 LL Private 16.67 18.75
public-ansiLL Public 16.67 4.67
public-etsiLL Public 12.50 4.67
efm-15-3LL Private 16.67 3.13
efm-15-2LL Private 16.67 2.08
efm-15-1LL Private 16.67 1.56
efm-10-2 LL Private 12.50 2.08
user-1 Private 4.00 1.00
user-2 Private 4.00 1.00