Network Card User Manual

M ULTICAST C ONFIGURATION
2-89
Fields and Attributes
• Interface – Activates the Port or Trunk scroll-down list.
• VLAN ID – Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
• Port or Trunk – Specifies the interface attached to a multicast router.
Web Interface
Click IGMP/Static Multicast Router Port Configuration. Specify the
interfaces attached to a multicast router, indicate the VLAN that will
forward the corresponding multicast traffic, and then click “Apply.”
Command Line Interface
This example configures port 11 as a multicast router port within VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 3-122
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1 3-123
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static