Manual

Conguring Your Computer

for the Barricade Print Server

If you are not connecting your printer to your Barricade, skip this

section.

With the Barricade’s built-in print server, you can connect your printer

to the Barricade and print from any computer on your network. Each

computer needs to have a “client” installed that will communicate

with the Barricade’s print server. Windows 2000 and UNIX and Linux

operating systems have a print client already installed. If you are

running Windows 95, 98, ME, 2000 or NT, you must use the SMC

Barricade Print Server Monitor as your print client.

Conguring Your Computer for the Barricade Print Server for

Windows 95/98/NT/ME/2000

Step 1: Installing SMC Barricade Print Server Monitor

You must rst install the software that will allow your programs to

print to the printer attached to the Barricade.

1. Insert the Installation CD into your

CD-ROM drive.

2. Click “Start” and “Run…”

3. Type “D:\PrintSvr\Setup” and click

“OK.”

4. InstallShield will guide you through the

installation process. Click “Next >” for each

window and “Finish” when

complete.

5. Windows must reboot for the changes to take place. When asked if

you want to reboot now, select yes and click “OK.”