- SMC Cable/DSL Broadband Router User Guide

Configuring your Computer
12
3. Locate and double-click the [Local Area Connection] icon
for the Ethernet adapter that is connected to the Barricade™.
When the [Status] dialog box window opens, click the
[Properties] button.
4. On the [Local Area Connection] Properties box, verify the box
next to [Internet Protocol (TCP/IP)] is checked. Then highlight
the Internet Protocol (TCP/IP), and click the [Properties] button.
5. Select [Obtain an IP address automatically] to configure your
computer for DHCP. Click the [OK] button to save this change
and close the [Properties] window.
6. Click the [OK] button again to save these new changes.
7. Reboot your PC.