- SMC Cable/DSL Broadband Router User Guide

Configuring Client TCP/IP

Manual IP Configuration

1. Follow steps 1-2 in “DHCP IP Configuration” on page 29

2. Select Manually in the

Configure field.

3. Enter an IP address

based on the default

network 192.168.2.x

(where x is

between 2

and 254), use

255.255.255.0 for the

subnet mask. In the

Router field, add

the IP

address of the

Barricade™ Router (default: 192.168.2.1) and click Apply

Now.

Enter the IP address for the Barricade™ Router in the DNS

servers field

. This automatically relays DNS requests to the

DNS server(s) provided by your ISP. Otherwise, add a specific

DNS server into the DNS Server sfield and click Apply now to

close the dialog box

5. Record the configured information in the following table.

6. Click Apply now to apply the new settings then close the

dialog box.

TCP/IP Configuration Setting

IP Address ____.____.____.____

Subnet Mask ____.____.____.____

DNS Server ____.____.____.____

Default Gateway ____.____.____.____