Network Device User Guide SMC7003-USB

M ODIFYING TCP/IP N ETWORKING O PTIONS
4-13
5. The “TCP/IP Settings” window is used to modify the IP
address, Name Server addresses and/or default gateway.
• You can change the IP address to a user-defined address
by selecting Specify an IP address (click inside the circle to
the left of it) and typing the address in the space provided.
• You can change the Name Server addresses to user-defined
addresses by selecting Specify name server addresses (click
inside the circle to the left of it) and typing the addresses
in the spaces provided.
• You can change the default gateway by leaving the box blank
to the left of Use default gateway on remote network.
Click OK.
6. The “SMC Dial-Up PPP Connection” window will be
redisplayed. Click OK to close the window.