Network Device User Guide SMC7003-USB

M ODIFYING TCP/IP N ETWORKING O PTIONS
4-4
Microsoft Windows 2000
TCP/IP settings are automatically set up during the software
installation process. The following procedure may be used to
change TCP/IP settings, if necessary.
1. From your PC desktop, right click the My Network Places
icon and select Properties.
2. From the “Network and Dial-Up Connections” window, right
click on the SMC Dial-Up PPP Connection icon and click
Properties.
Note: The icon name may differ from that specified above. The
SMC connection icon will be identified as
“DSLWanUsb-Line0” in the Device Name column when
details are viewed from the “Network and Dial-Up
Connections” window (View - Details).
3. From the “Networking” tab of the “SMC Dial-UP PPP
Connection Properties” window, select Internet Protocol
(TCP/IP) and click Properties.