Network Device User Guide SMC7003-USB

D RIVER I NSTALLATION
3-8
Installing the Modem
Note: For Windows 98 SE applications, you may need the
Windows 98 SE source files to complete the installation.
Microsoft Windows has an auto-detect feature, known as “Plug
and Play,” that is capable of identifying when new hardware has
been installed. After you run the setup program, reboot your PC,
and then connect the EZ Connect ADSL USB Modem to your PC.
1. Insert the rectangular end of a USB cable into the USB port of
your PC, and the square end of the cable into the USB port of
the USB modem. It will be detected automatically and
messages will be displayed as the modem software is installed.
2. For Windows 2000 applications, the “Digital Signature Not
Found” window may appear warning that the installation
software is not a digitally signed version. A digital signature is
not necessary; SMC has tested the software with Windows
2000. Click Yes to allow the installation to continue. (We will
be releasing a digitally signed version of the driver in the near
future.)
3. For Windows 2000 applications, the “Found New Hardware
Wizard” window indicates the modem has been installed and
suggests you reboot the system to have new settings take
effect. Click Finish.
4. A message will be displayed confirming that you want to
reboot the system, click Yes.
5. Once the PC has rebooted, installation of the EZ Connect ADSL
USB Modem is complete.