Network Device User Guide SMC7003-USB

D RIVER I NSTALLATION
3-4
Prerequisite Information
The following information may be required, depending on the
driver you install. Contact your DSL service provider before
proceeding with software installation.
• IP Address Settings - the software installation process allows the
server to dynamically assign IP Address settings. If your
application requires a static setting for specific address
information you will need to know the following:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information - the modem software installation
process allows the server to dynamically assign Name Server
Address settings. If your application requires a static setting for
specific address information you will need to know the
following:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• Mode (for LAN applications only)
• Virtual Path ID (VPI)*
• Virtual Circuit ID (VCI)*
• Encapsulation type*
• Modulation type*
• User Name (for PPP applications only)
• Password (for PPP applications only)