Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-71
Status The status for an entry can be set to:
Permanent This entry is currently in use
and will remain so after the
next reset of the switch.
DeleteOnReset This entry is currently in use
and will remain so until the
next reset.
Invalid Removes the corresponding
entry.
DeleteOnTimeOut This entry is currently in use
and will remain so until it is
aged out. (Refer to “Aging
Time” on page 2-67.)
Other This entry is currently in use
but the conditions under which
it will remain so differ from the
preceding values.
Sorted by Selects the primary sort key for displaying table
entries. Note that only VID+MAC is implemented
in the current firmware release.
[Show] Displays the static address table sorted on VID as
the primary key and MAC address as secondary
key.
[More] Scrolls through entries in the static address table.
[Set] Adds the specified entry to the static address table,
such as shown in the following example:
VID : 1 MAC : 00-00-00-e8-34-22
Unit : 1 Port: 1
Status : Permanent
Menu Description