Switch User Manual
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-58
802.1Q VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
802.1Q VLAN Port Configuration : Unit 1 Port 1 - 12
===============================
Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type Filtering Status Registrations PDU Origin
---------------------------------------------------------------------
1 1 All FALSE DISABLED 0 00-00-00-00-00-00
2 1 All FALSE DISABLED 0 00-00-00-00-00-00
3 1 All FALSE DISABLED 0 00-00-00-00-00-00
4 1 All FALSE DISABLED 0 00-00-00-00-00-00
5 1 All FALSE DISABLED 0 00-00-00-00-00-00
6 1 All FALSE DISABLED 0 00-00-00-00-00-00
7 1 All FALSE DISABLED 0 00-00-00-00-00-00
8 1 All FALSE DISABLED 0 00-00-00-00-00-00
9 1 All FALSE DISABLED 0 00-00-00-00-00-00
10 1 All FALSE DISABLED 0 00-00-00-00-00-00
11 1 All FALSE DISABLED 0 00-00-00-00-00-00
12 1 All FALSE DISABLED 0 00-00-00-00-00-00
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
PVID The VLAN ID assigned to untagged frames
received on this port.
Acceptable
Frame Type*
This switch accepts “All” frame types, including
VLAN tagged or VLAN untagged frames. Note that
all VLAN untagged frames received on this port
are assigned to the PVID for this port.
Ingress Filtering* If set to “True,” incoming frames for VLANs which
do not include this ingress port in their member
set will be discarded at the ingress port.
* These controls do not affect VLAN independent BPDU frames, such as
GVRP or STP. However, they do affect VLAN dependent BPDU frames,
such as GMRP.