Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-57
For example, the following screen displays settings for VLAN 2,
which includes tagged ports 1-6, and forbidden port 8.
Notes: 1. To allow this switch to participate in a VLAN group
that extends beyond this switch, you must add the
VLAN ID for the required external groups.
2. If a removed port is no longer assigned to any other
group as an untagged port, it will automatically be
assigned to VLAN group 1 as untagged.
Forbidden Egress Ports Prevents a port from being automatically added to
this VLAN via GVRP. Note that GVRP is not
supported in the current firmware release.
Untagged Ports You can add a port to the displayed VLAN as an
untagged port by setting this field to “1” or as a
tagged port by setting it to “0.” This field is only
enabled if the corresponding port has been added
to the displayed VLAN as an “Egress Port.”
[Show] Displays settings for the specified VLAN.
[More] Displays consecutively numbered VLANs.
[New] Sets up the screen for configuring a new VLAN.
802.1Q VLAN Static Table Configuration
======================================
VID VLAN Name Status
------------------------------
2 Active
Unit Egress Ports Forbidden Egress Ports
1. 111111000000 000000000000 ---- 000000010000 000000000000 ----
2. ------------ ------------ ---- ------------ ------------ ----
3. ------------ ------------ ---- ------------ ------------ ----
4. ------------ ------------ ---- ------------ ------------ ----
Unit Untagged Ports
1. 111111000000 000000000000 ---- VID : 2
2. ------------ ------------ ---- [Show]
3. ------------ ------------ ---- [More]
4. ------------ ------------ ---- [New]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description