Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-56
802.1Q VLAN Static Table Configuration
Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN from
any unit in the stack as a tagged or untagged member. Or you can
prevent a port from being automatically added to a VLAN by the
GVRP protocol.
802.1Q VLAN Static Table Configuration
======================================
VID VLAN Name Status
------------------------------
1Active
Unit Egress Ports Forbidden Egress Ports
1. 111111111111 111111111111 ---- 000000000000 000000000000 ----
2. ------------ ------------ ---- ------------ ------------ ----
3. ------------ ------------ ---- ------------ ------------ ----
4. ------------ ------------ ---- ------------ ------------ ----
Unit Untagged Ports
1. 111111111111 111111111111 ---- VID : 1
2. ------------ ------------ ---- [Show]
3. ------------ ------------ ---- [More]
4. ------------ ------------ ---- [New]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
VID The ID for the VLAN currently displayed.
Range: 1-2048
VLAN Name A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Status Sets the current editing status for this VLAN as: Not
in Service, Destroy or Active.
Unit Stack unit.
Egress Ports Set the entry for any port in this field to “1” to add
it to the displayed VLAN, or “0” to remove it from
the VLAN.