Manualshelf

Switch User Manual

ManualsBrandsSMC Networks ManualsSwitchSMC6924VF
51525354555657585960
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-35
Configuring STA for Ports
The following figure and table describe port STA configuration.
Spanning Tree Port Configuration : Unit 1 Port 1 - 12
================================
Fast forwarding on all ports : [Enable] [Disable]
Port Type Priority Cost FastForwarding
-----------------------------------------------------
1 100FX 128 19 ENABLED
2 100FX 128 19 ENABLED
3 100FX 128 19 ENABLED
4 100FX 128 19 ENABLED
5 100FX 128 19 ENABLED
6 100FX 128 19 ENABLED
7 100FX 128 19 ENABLED
8 100FX 128 19 ENABLED
9 100FX 128 19 ENABLED
10 100FX 128 19 ENABLED
11 100FX 128 19 ENABLED
12 100FX 128 19 ENABLED
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
other keys to make changes.
Parameter Default Description
Fast
forwarding
on
all ports
Enabled See “FastForwarding” in this table.
Type Shows port type as:
100FX : 100BASE-FX
1000SX : 1000BASE-SX
1000LX : 1000BASE-LX
1000T : 1000BASE-T
Priority 128 Defines the priority for the use of a port in the
STA algorithm. If the path cost for all ports on a
switch are the same, the port with the highest
priority (i.e., lowest value) will be configured as
an active link in the Spanning Tree. Where more
than one port is assigned the highest priority,
the port with lowest numeric identifier will be
enabled. The range is 0 - 255.