Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-33
Parameter Default Description
Spanning Tree
Protocol
Enabled Enable this parameter to participate in a STA
compliant network.
Priority 32,768 Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices have
the same priority, the device with the lowest
MAC address will then become the root
device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value,
the higher the priority.
Hello Time 2 Time interval (in seconds) at which the root
device transmits a configuration message.
The minimum value is1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2) -1].