Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-32
Using the Spanning Tree Algorithm
The Spanning Tree Algorithm can be used to detect and disable
network loops, and to provide backup links between switches,
bridges or routers. This allows the switch to interact with other
bridging devices (that is, an STA-compliant switch, bridge or router)
in your network to ensure that only one route exists between any two
stations on the network. For a more detailed description of how to
use this algorithm, refer to
“Spanning Tree Algorithm” on page 4-2.
Configuring Bridge STA
The following figure and table describe Bridge STA configuration.
Spanning Tree Configuration : Selection Menu
============================================
STA Bridge Configuration ...
STA Port Configuration ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Spanning Tree Configuration : Bridge STA Configuration
======================================================
Spanning Tree Protocol : ENABLED
Priority : 32768
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds): 15
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options,
other keys to make changes.