Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-20
Configuring IP Trap Managers
The following figure and table describe how to specify
management stations that will receive authentication failure
messages or other trap messages from the switch. Up to 5 trap
managers may be entered.
SNMP Configuration : IP Trap Managers
=====================================
IP Address Community Name Status
1. 10.1.0.23 Public DISABLED
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap management
access.
Status Sets administrative status of selected entry to
enabled or disabled.