Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-11
Changing the Network Configuration
Use the Network Configuration menu to set the bootup option,
configure the switch’s Internet Protocol (IP) parameters, enable the
on-board Web agent, or to set the number of concurrent Telnet
sessions allowed. The screen shown below is described in the
following table.
Console Login
Configuration
Sets user names and passwords for system
access, as well as the invalid password
threshold and lockout time.
TFTP Download Downloads new version of firmware to
update your system (in-band).
Configuration Save
& Restore
Saves the switch configuration to a file on a
TFTP server. This file can be later
downloaded to restore the configuration.
Network Configuration
=====================
IP Configuration ...
IP Connectivity Test (Ping) ...
HTTP Configuration ...
MAX Number of allowed Telnet sessions (1 -4) : 4
MAC Address : 00-E0-29-52-28-00
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
IP Configuration Screen used to set the bootup option, or
configure the switch’s IP parameters.
IP Connectivity Test (Ping) Screen used to test IP connectivity to a
specified device.
HTTP Configuration Screen used to enable the Web agent.
Menu Description