Switch User Manual

U SING THE S YSTEM C ONFIGURATION P ROGRAM
2-3
Main Menu
With the system configuration program you can define system
parameters, manage and control the switch, the connected stack
and all its ports, or monitor network conditions. The figure below
of the Main Menu and the following table briefly describe the
selections available from this program.
Note: Options for the currently selected item are displayed in the
highlighted area at the bottom of the interface screen.
Main Menu
=========
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
Restart System Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Menu Description
System Information Menu
System Information Provides basic system description, including
contact information.
Switch Information Shows hardware/firmware version numbers,
power status, and expansion modules used in
the stack.