Switch User Manual

W EB -B ASED M ANAGEMENT
3-39
VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
Parameter Description
PVID The VLAN ID assigned to untagged frames received
on this port. Use the PVID to assign ports to the same
untagged VLAN.
Acceptable Frame
Type
This switch accepts “All” frame types, including VLAN
tagged or VLAN untagged frames. Note that all VLAN
untagged frames received on this port are assigned to
the PVID for this port.
Ingress Filtering If set to “True,” incoming frames for VLANs which do
not include this port in their member set will be
discarded at the inbound port.
GVRP Status* Enables or disables GVRP for this port. When
disabled, any GVRP packets received on this port will
be discarded and no GVRP registrations will be
propagated from other ports.
Note that GVRP must be enabled for the switch
before this setting to take effect. (See “Configuring
Bridge MIB Extensions” on page 3-29.)
GVRP Failed
Registrations*
The total number of failed GVRP registrations, for any
reason, on this port.